Showsasmode - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Usage Guidelines
The command chgfps can be used only when the storage system uses the S2600F or S2600C
controller enclosure.
Example
On controller A, change the rate of the FC host port 0 to 2 Gbit/s.
OceanStor: admin> chgfps -c a -i 0 -s 2
If change the speed online, this operation will lead to interrupt the service!
Do you want to continue? y or n: y

5.13.3 showsasmode

Function
The command showsasmode is used to query the information about Serial Attached SCSI (SAS)
host ports.
Format
showsasmode [-c controller ID -i port ID]
Parameters
Keyword and Value
-c controller ID
-i port ID
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
Issue 07 (2010-05-20)
Description
The controller ID. The value
is A or B, and is case
insensitive.
The ID of a mini SAS host
port. The value ranges from 0
(or 00) to 3 (or 03). 0 (or 00)
and 1 (or 01) indicate targets.
2 (or 02) and 3 (or 03)
indicate initiators.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Management Commands
Default Value
None.
None.
5-27