Chgiscsiip - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l
l
Example
Query the IP addresses of all iSCSI host ports.
OceanStor: admin> showiscsiip
Controller

5.13.5 chgiscsiip

Function
The command chgiscsiip is used to change the IP addresses of iSCSI host ports.
Format
chgiscsiip -c controller ID -p Port ID -a IP address -s subnet mask -m config mode
Parameters
Keyword and Value
-c controller ID
Issue 07 (2010-05-20)
The command showiscsiip is used to query the IP addresses of all iSCSI host ports.
The command showiscsiip -c controller ID -p port ID is used to query the IP address of a
specified iSCSI host port on a controller.
NOTE
The command is only applicable to iSCSI host ports on the controller of the storage device.
Port ID
A 0
B 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP Address Subnet Mask
192.168.1.153 255.255.255.0
192.168.26.1 255.255.255.0
Description
The controller ID. The value
is A or B, and is case
insensitive.
5 Device Management Commands
Default Value
None.
5-29