Ups Information Query Commands; Showupstime - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands

5.7 UPS Information Query Commands

UPS information query commands are used to query the UPS information.

5.7.1 showupstime

5.7.2 showupsstat
5.7.1 showupstime
Function
The command showupstime is used to query the system time of a UPS.
Format
showupstime -i ups id
Parameters
Keyword and Value
-i ups id
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
5-16
Subrack ID |
Expander Board ID |
Type |
Status |
Expander Port 0 |
Expander Port 1 |
Logic Version |
PCB Version |
Electronic Label |
|
|
|
|
|
|
|
|
|
=========================================================================
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1
SAS Expander Board
Online
Connected
Not Connected
120T01
STE1DACA VER.B
[Board Properties]
BoardType=STE1DACA
BarCode=02G051Z09C000095
Item=0302G051
Description=JBOD controller
Manufactured=2009-12-10
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=
Description
The UPS ID. The value can
be 0 or 1.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
Issue 07 (2010-05-20)