Expander Module Management Command - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l
l
l
Example
Query the information about all host port modules in the system.
OceanStor: admin> showinterface
Controller
Port2
A
Connected
Electronic Label:
[Board Properties]
BoardType=STE1FCHA
BarCode=02G055Z094000017
Item=0302G055
Description=FC Host Interface Card
Manufactured=2009-04-24
VendorName=Huawei
IssueNumber=00
CLEIcode=
BOM=
B
Not connected STE1FCHA VER.B
Electronic Label:
[Board Properties]
BoardType=STE1FCHA
BarCode=02G055Z094000038
Item=0302G055
Description=FC Host Interface Card
Manufactured=2009-04-24
VendorName=Huawei
IssueNumber=00
CLEIcode=
BOM=

5.6 Expander Module Management Command

Expander module management command is used to manage the expander module.
5.6.1 showexpboard
5-14
The command showinterface is used to query the information about all host port modules
in the system.
The command showinterface -c controller ID is used to query the information about all
host port modules on a specified controller.
The command showinterface -c controller ID -i interface ID is used to query the
information about a specified host port module on a controller.
Interface ID
Port3
0
STE1FCHA VER.B
0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type Status Port0
PCBVer
4*FC online Connected
4*FC online Connected
OceanStor S2600 Storage System
Command Reference
Port1
Connected Connected
Connected Connected
Issue 07 (2010-05-20)