Showtgt - Huawei OceanStor S2600 Command Reference Manual

9 Value-Added Service Management Commands
System Response
When the command is complete, you can run the showtgt command to view the result.

9.4.2 showtgt

Function
The command showtgt is used to query information of the initiator added to a target (controller).
Format
showtgt -c controller ID [-ti target ID]
Parameters
Keyword and Value Description
-c controller ID
-ti target ID
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l
l
Example
Query information of the target on controller A.
OceanStor: admin> showtgt -c a
Controller ID
System Response
None.
9-52
The controller ID. The value is A or B, and it is case
insensitive.
The target ID. The value ranges from 0 to 7.
The showtgt -c controller ID command queries information of all the targets (controllers)
added to the initiator.
The showtgt -c controller ID -ti target ID command queries detailed information of a
specified target (controller) added to the initiator.
Target ID
A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Target IP
0 128.12.13.25
OceanStor S2600 Storage System
Command Reference
Target Port Connect Status
3260 Unconnected
Issue 07 (2010-05-20)
Default Value
None.
None.