Activehyimg - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Parameters
Keyword and Value Description
-i HyperImage ID...
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
l
l
l
Example
Recreate the HyperImages with the ID of 12 and ID of 27.
OceanStor: admin> recreatehyimg -i 12,27
The command has been sent, please wait...
System Response
When the command is complete, you can run the showhyimginfo command to view the result.

9.1.16 activehyimg

Function
The command activehyimg is used to start a HyperImage.
Format
activehyimg {-i HyperImage ID ...}
Issue 07 (2010-05-20)
The HyperImage ID. This command supports up to
eight HyperImage IDs at one time, which are
separated by commas. The value ranges from 0 to
127.
You can query the information by running the
showhyimginfo command.
When the HyperImage is in the activated status, if you want to recreate it , this HyperImage
is stopped, and then activated. The snapshot time is set to the recreated time.
When the HyperImage is in the stopped status, if you want to recreate it, this HyperImage
is activated. The snapshot time is set to the recreated time.
When the HyperImage is in the rollback or error status, if you want to recreate it, the system
prompts that recreation fails.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Value-Added Service Management Commands
Default Value
None.
9-17