Deletehycplun - Huawei OceanStor S2600 Command Reference Manual

9 Value-Added Service Management Commands
System Response
None.

9.2.4 deletehycplun

Function
The command deletehycplun is used to delete the target LUN of a HyperCopy.
Format
deletehycplun -i HyperCopy ID -ti target LUN ID
Parameters
Keyword and Value Description
-i HyperCopy ID
-ti target LUN ID
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
l
l
Example
Delete the target LUN with the ID of 0 of the HyperCopy with the ID of 0.
9-34
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
The target LUN ID.
When the LUN is "internal LUN", the value ranges
from o to 511. When the LUN is "external LUN" or
"third-part LUN", the value ranges from 100000 to
101023.
You can query the information by running the
showhycpluninfo command.
Before deleting, you can run the showhycpluninfo command to query the correct target
LUN ID, thus preventing deletion by mistake.
Failure of a certain target LUN might cause fault of the HyperCopy task. When the failed
target LUN is deleted, the HyperCopy task is started automatically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
Issue 07 (2010-05-20)