Huawei OceanStor S2600 Command Reference Manual page 223

OceanStor S2600 Storage System
Command Reference
Function
The createhycp command creates the HyperCopy based on local S2600 storage systems, other
S2600 storage systems, and remote storage systems.
Format
createhycp -n Hycp name [-ct copy type] [-sl speed level] [-is initially synchronized ] [-sli source
LUN link ID -si source LUN ID]|-si source LUN ID| -swwn source LUN WWN | [-swwpn source
LUN WWPN -sln source LUN number] [-tli target LUN link ID -ti target LUN ID]|-ti target
LUN ID| -twwn target LUN WWN | [-twwpn target LUN WWPN -tln target LUN number]
Parameters
Keyword and Value
-n Hycp name
-ct copy type
-sl speed level
-is initially synchronized
-sli source LUN link ID
-si source LUN ID
Issue 07 (2010-05-20)
Description
The HyperCopy name. The name contains 1
to 32 characters, including numbers, letters,
underscores, and hyphens. The first character
cannot be a hyphen.
The HyperCopy type. The value can be 1 or
2.
1 stands for full copy.
l
2 stands for incremental copy.
l
The HyperCopy speed. The value ranges
from 1 to 4.
1 stands for low.
l
2 stands for middle.
l
3 stands for high.
l
4 stands for ASAP.
l
This parameter decides whether to perform
initial synchronization. The parameter takes
effect only when the HyperCopy type is
changed from full copy to incremental
copy. The value can be 0 or 1.
0 stands for no.
l
1 stands for yes.
l
The link ID of the source LUN. The value
ranges from 0 to 255.
The sourceLUN ID. The value ranges from
0 to 511.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Value-Added Service Management Commands
Default Value
None.
1
2
1
None.
None.
9-39