Chghycpinfo - Huawei OceanStor S2600 Command Reference Manual

9 Value-Added Service Management Commands
System Response
If the target LUN is in an external array that belongs to another S2600 device, the link type, link
ID, and link status of the target LUN can be displayed.

9.2.3 chghycpinfo

Function
The command chghycpinfo is used to change properties of the HyperCopy.
Format
chghycpinfo -i HyperCopy ID {[-n the HyperCopy name] [-s the HyperCopy speed] [-t the
HyperCopy type [-is initially synchronize]]}
Parameters
Keyword and Value
-i HyperCopy ID
-n the HyperCopy name The HyperCopy name. The name contains 1 to 32
-s the HyperCopy speed The HyperCopy speed. The value ranges from 1
-t the HyperCopy type
9-32
Description
The HyperCopy ID. The value ranges from 0 to
63.
You can query the information by running the
showhycpinfo command.
characters, including numbers, letters,
underscores, and hyphens. The first character
cannot be a hyphen.
to 4.
1 stands for low.
l
2 stands for middle.
l
3 stands for high.
l
4 stands for ASAP.
l
NOTE
ASAP is short for As Soon As Possible.
The HyperCopy type. The value can be 1 or 2.
The value 1 stands for full copy.
l
The value 2 stands for increment copy.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
None.
Issue 07 (2010-05-20)