Initiator And Target (Controller) Configuration Commands; Addtgt - Huawei OceanStor S2600 Command Reference Manual

9 Value-Added Service Management Commands
OceanStor: admin> showexplunnum -i 23
The number of this expanded LUN is 6
System Response
None.
9.4 Initiator and target (controller) Configuration
Commands
Initiator and target (controller) configuration commands are used to modify the information of
the initiator and target (controller).

9.4.1 addtgt

9.4.2 showtgt
9.4.3 connecttgt
9.4.4 chgtgt
9.4.5 disconnecttgt
9.4.6 chgiscsiininame
9.4.7 showiscsiname
9.4.8 deletetgtinfo
9.4.9 chgini
9.4.1 addtgt
Function
The command addtgt is used to add a related target (controller) to the initiator.
Format
addtgt -c controller ID -p port ID -ip IP address [-port TCP/IP port] [-m recovery mode] [-
chap yes or no] [-user user -pwd password]
Parameters
Keyword and Value Description
-c controller ID
9-50
The controller ID. The value is A or B, and it is case
insensitive.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
Issue 07 (2010-05-20)