Exportconf - Huawei OceanStor S2600 Command Reference Manual

4 System Management Commands
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When using this command, note the following items:
l
l
Example
Export the debugging information from the black box and save it on the FTP server with the IP
address 10.10.10.1. The debugging information is saved in information.tgz in /home/temp/. The
FTP user name is root, and the password is adfjla.
OceanStor: admin> exportblackbox -i 10.10.10.1 -u root -p adfjla -f /home/temp/
information.tgz

4.4.3 exportconf

Function
The command exportconf is used to export the data of the configuration file from the memory.
Format
exportconf -i host IP address -u user name -p password -f file
Parameters
Keyword and Value
-i host IP address
-u user name
-p password
4-14
It is recommended that the file is a .tgz file.
Before you run this command, ensure that the FTP service is enabled on the FTP server.
NOTE
When a fault or an exception occurs in the system, the debugging information stored in the black box helps
maintenance personnel to determine the fault and analyze the cause.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The IP address of the FTP
server. It is requested that the
FTP server can access the
storage network system.
The user name of the FTP
server.
The user password of the FTP
server.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
Issue 07 (2010-05-20)