Showcomsleep - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands
Usage Guidelines
When using this command, note the following items:
l
l
Example
Set RAID group 0 to hibernate and the wait time to 10 minutes.
OceanStor: admin> chgcomsleep -o 2 -i 0 -t 1 -id 0

5.4.2 showcomsleep

Function
The command showcomsleep is used to query whether components are allowed to hibernate. If
allowed, query whether the components are in hibernation state and the wait time before
hibernation.
Format
showcomsleep [ -i raid id ] -t component type
Parameters
Keyword and Value
-i raid id
-t component type
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
5-12
If the member disks of a RAID group contains coffer disks, the RAID group cannot be set
to hibernate.
The RAID groups in abnormal state cannot be set to hibernate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The RAID ID. The value
ranges from 0 to 31.
The component type. The
value can be 1 or 2, and is
described as follows:
1: The RAID.
l
2: The disk. -i is
l
unavailable.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
Issue 07 (2010-05-20)