Basic Operation Commands - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
About This Chapter
Basic operation commands are used to set the basic information of the storage system.
3.1 Help Command
Help command is used to query the function and usage of every command.
3.2 System Exit and Logout Commands
System exit and logout commands are used to exit the storage system.
3.3 Batch Processing Command
Batch processing command is used to execute the command scripts.
3.4 Commands of Setting the IP Address of the Management Network Interface on the Controller
Commands of setting the IP address of the management network interface on the controller is
used to set the IP address of the management network interface on the controller.
3.5 CLI Idle Time Setting Command
CLI idle time setting command is used to set CLI idle time.
Issue 07 (2010-05-20)
3

Basic Operation Commands

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Operation Commands
3-1