Huawei OceanStor S2600 Command Reference Manual page 220

9 Value-Added Service Management Commands
Function
The command chghycpstatus is used to change the HyperCopy status.
Format
chghycpstatus -i HyperCopy ID -s|-e|-p|-c
Parameters
Keyword and Value Description
-i HyperCopy ID
-s
-e
-p
-c
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
Before starting the HyperCopy:
l
l
l
Before ending the HyperCopy:
The HyperCopy should be in created mode, copy completed mode, or stop mode.
When suspending the HyperCopy:
Ensure that the HyperCopy is in waiting or copying mode.
Before resuming the HyperCopy:
9-36
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
The parameter starts the HyperCopy.
The parameter ends the HyperCopy.
The parameter suspends the HyperCopy.
The parameter resumes the HyperCopy.
Ensure that the HyperCopy is in created mode, copy completed mode, or stop mode.
Create a resource pool for incremental copy.
If the maximum number of the HyperCopy tasks supported by the controller is reached,
the HyperCopy tasks is waiting. After a certain HyperCopy task in the copy mode is
complete, a HyperCopy task in the waiting mode is automatically started.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
None.
None.
Issue 07 (2010-05-20)