Chghost - Huawei OceanStor S2600 Command Reference Manual

6 Service Management Commands
Parameters
Keyword and Value
-i host group ID
-n host name
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When using this command, note the following items:
l
l
Example
Add the host user into host group 2.
OceanStor: admin> addhost -i 2 -n user

6.3.6 chghost

Function
The command chghost is used to change the host name.
6-20
The command addhost -n host name is used to name the host and add it to the default host
group.
The command addhost -i host group ID -n host name is used to name the host and add it
to a specified host group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The host group ID. The value
ranges from 0 to 31.
If you do not specify a host
group for adding a host, the
host is added to the default
host group.
The name contains 1 to 32
characters, including
numbers, letters, underscores
and hyphens. The first
character cannot be a hyphen.
The name of a host is case
sensitive, and must be
unique.
OceanStor S2600 Storage System
Command Reference
Default Value
0.
None.
Issue 07 (2010-05-20)