Showctrlboard - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference

5.3.1 showctrlboard

Function
The command showctrlboard is used to query the state information about a controller.
Format
showctrlboard [ -c controller ID ]
Parameters
Keyword and Value
-c controller ID
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l
l
Example
Query the state information about all controllers.
OceanStor: admin> showctrlboard
Issue 07 (2010-05-20)
The command showctrlboard is used to query the state information about all controllers.
The command showctrlboard -c controller ID is used to query the state information about
a specified controller.
=========================================================================
-------------------------------------------------------------------------
Controller Board ID
Type
Status
Primary Port
UPS Serial Port
Management Serial Port
Network Port
Heartbeat Port
Logic Version
PCB Version
BIOS Version
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The controller ID. The value
is A or B, and is case
insensitive.
Controller Board Information
| A
| SAS Controller Board
| On
| Not Connected
| Not Connected
| Not Connected
| Connected
| Connected
| 230T02
| STE1SCUA VER.C
| T02
5 Device Management Commands
Default Value
None.
5-7