Showfcmode - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands
Keyword and Value
-p Port ID
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showiscsiroute is used to query the routing configurations information about an
iSCSI host port.
Example
On controller A, query the configurations of iSCSI host port with ID 1.
OceanStor: admin> showiscsiroute -c a -p 1
Controller

5.13.9 showfcmode

Function
The command showfcmode is used to query the topology of the current FC port.
5-34
NOTE
The command is only applicable to iSCSI host ports on the controller of the storage device.
Port ID Dest IP
A 1 192.12.5.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The ID of an iSCSI host port.
The value ranges from 0 to 3.
S2600i: Each host port
l
module is configured with
four iSCSI host ports.
From left to right, the host
ports are numbered 0, 1, 2,
and 3 in sequence.
S2600C: Each host port
l
module is configured with
two FC host ports and two
iSCSI host ports. From left
to right, the iSCSI host
ports are numbered 0 and
1 in sequence.
Subnet Mask
255.255.255.0
OceanStor S2600 Storage System
Command Reference
Default Value
None.
Gateway
192.168.200.1
Issue 07 (2010-05-20)