Huawei OceanStor S2600 Command Reference Manual page 269

OceanStor S2600 Storage System
Command Reference
Reconstruct
member disk
Reconstruction
Redhat package
manager
Redundancy
Redundant Array
of Independent
Disks
Redundant copy
Repair
inconsistent stripe
S
Script
Secondary
Storage
Controller
Serial port
Service data
SFP optical
module
Simple network
management
protocol (SNMP)
Single point
failure
Smooth expansion A process of expanding capacity online without interrupting services.
Issue 07 (2010-05-20)
To restore the data from the faulty disk to the new disk after you replace
a faulty member disk in a RAID group with a new one.
A function of the OceanStor storage system. It refers to the process of
restoring the data saved in the faulty member disk in a RAID group.
Redhat package manager widely applied in Linux.
The inclusion of extra components of a given type in a system (beyond
those required by the system to carry out its function) for the purpose
of enabling continued operation in the event of a component failure.
A family of techniques for managing multiple disks to deliver desirable
cost, data availability, and performance characteristics to host
environments.
When the system monitors that a member disk in the RAID groups is
about to fail, the system copies the data in the disk to a hot-spare disk.
This technology is called redundant copy.
To correct the invalid protection of the check data block in a redundancy
group stripe for the protected space in the stripe.
A collection of data statements used to perform an operation.
In relation to the primary storage controller, the secondary storage
controller is the backup for the primary storage controller. When the
primary storage controller fails, the secondary controller can be replaced
to be the primary storage controller and performs management
operations on the controller subrack.
An input/output location (channel) that sends and receives data to and
from a computer's CPU or a communications device one bit at a time.
Serial ports are used for serial data communication and as interfaces
with some peripheral devices, such as mouse and printers.
Data which is saved in data disk. Service data is the data source for
computing check data in parity disk.
A component that can make data conversion between optical signals
and electrical signals and that can receive and transmit data.
An internet engineering task force(IETF) protocol used to monitor and
manage the systems and devices on a network. The monitored and
managed data is defined by the management information base(MIB).
The protocol supports the following functions: data request, data
retrieval, data setting or data writing, and trap.
Since some components or channels are not redundant, the failure of a
device or component causes the breakdown of all devices or
components.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
B Glossary
B-9