Showiscsiip - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands
l
l
Example
Query the information about all mini SAS host ports in the system.
OceanStor: admin> showsasmode
Controller

5.13.4 showiscsiip

Function
The command showiscsiip is used to query the IP addresses of all iSCSI host ports.
Format
showiscsiip [-c controller ID -p port ID ]
Parameters
Keyword and Value
-c controller ID
-p port ID
5-28
The command showsasmode -c controller ID -i port ID is used to query the information
about a specified mini SAS host port in a controller.
When the front-end host port is a mini SAS host port, you can run the command to print
the information about initiators and targets. When the front-end host port is an FC or iSCSI
host port, you can run the command to print the information about initiators.
Port ID Mode
A 02 Initiator 000
A 03 Initiator 000
B 02 Initiator 000
B 03 Initiator 000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
FirmwareVersion
Description
The controller ID. The value
is A or B, and is case
insensitive.
The iSCSI host port ID. The
ID value ranges from 0 to 3.
S2600i: Each host port
l
module is configured with
four iSCSI host ports.
From left to right, the host
ports are numbered 0, 1, 2,
and 3 in sequence.
S2600C: Each host port
l
module is configured with
two FC host ports and two
iSCSI host ports. From left
to right, the iSCSI host
ports are numbered 0 and
1 in sequence.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
Issue 07 (2010-05-20)