System Management Commands; Table 2-3 System Management Command Set - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Classification
Batch processing command
Commands of setting the IP address of the
management network interface on the
controller
CLI idle time setting command

2.2.2 System Management Commands

The system management commands are mainly used to configure and query the running
information of the storage system.
Table 2-3

Table 2-3 System management command set

Classification
System information query commands
Controller management commands
Alarm log exporting or log exporting
commands
Configuration management commands
Statistics management commands
Issue 07 (2010-05-20)
lists the system management commands.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Introduction to the CLI Commands
Command
autobat
chgctrlip
showctrlip
chgidletime
Command
showsys
showsysfail
showtemperature
showvoltage
showsn
showlicense
offline
showctrlinfo
exportalm
exportcofferdb
exportblackbox
exportconf
importconf
exportstat
showstatswitch
chgstatswitch
statperf
statres
2-5