B Out-Of-Band Management; Nvme Basic Management Command - Huawei ES3000 V5 User Manual

ES3000 V5 NVMe PCIe SSD
User Guide
This section describes the out-of-band management functions of the ES3000 V5.
The ES3000 V5 provides the following out-of-band management functions:
l
l
l
B.1 NVMe Basic Management Command
The I2C address of NVMe out-of-band management commands is 0x6A (excluding the R/W
bits).
Table B-1 NVMe basic management data structure
Command
Code
0
Issue 07 (2019-03-19)
B
NVMe basic management commands
VPD information
Temperature sensors
NOTE
To use out-of-band management functions, the server must support them. To check whether a server
supports out-of-band management, contact the server vendor.
Offset
(Byte)
00
Copyright © Huawei Technologies Co., Ltd.
Out-of-Band Management
Description
Length of Status: Indicates number of additional bytes to
read before encountering PEC. This value should always be
6 (06h) in implementations of this version of the spec.

B Out-of-Band Management

200