Configuring Advanced Port Security Control - HP 1920 Gigabit Ethernet Switch Series User Manual

Table 130 Configuration items
Item
Port
Secure MAC Address
VLAN ID

Configuring advanced port security control

1. From the navigation tree, select Authentication > Port Security.
The Port Security page appears.
2. In the Advanced Port Security Configuration area, click Ports Enabled With Advanced Features.
Figure 415 Ports Enabled With Advanced Features area
3. Click Add.
The page for configuring advanced port security control appears.
Figure 416 Configuring advanced port security control
4. Configure advanced port security control as described in
5. Click Apply.
Table 131 Configuration items
Item
Port
Security Mode
Description
Selects a port where the secure MAC address is configured.
Enters the MAC address that you want to configure as a secure MAC address.
Enters the ID of the VLAN in which the secure MAC address is configured.
The VLAN must already exist on the selected port.
Description
Selects a port where you want to configure port security.
By default, port security is disabled on all ports, and access to the ports is not restricted.
Selects a port security mode.
For more information about advanced security modes, see
Table
428
131.
Table 127.