HP 1920 Gigabit Ethernet Switch Series User Manual page 97
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
3.
Enter 1 for Mirroring Group ID, and select Local from the Type list.
4.
Click Apply.
Configuring GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as the source ports
1.
Click Modify Port.
2.
Select 1 – Local from the Mirroring Group ID list.
3.
Select Mirror Port from the Port Type list.
4.
Select both from the Stream Orientation list.
5.
Select 1 (GigabitEthernet 1/0/1) and 2 (GigabitEthernet 1/0/2) on the chassis front panel.
Figure 70 Configuring the source ports
6.
Click Apply.
A configuration progress dialog box appears.
7.
After the success notification appears, click Close.
Configuring GigabitEthernet 1/0/3 as the monitor port
1.
Click Modify Port.
2.
Select 1 – Local from the Mirroring Group ID list.
3.
Select Monitor Port from the Port Type list.
4.
Select 3 (GigabitEthernet 1/0/3) on the chassis front panel.
84
Hide quick links:
Advertisement
Table of Contents
