HP 1920 Gigabit Ethernet Switch Series User Manual page 420

Figure 388 MAC authentication configuration page
3. Configure MAC authentication global settings as described in
Table 125 Configuration items
Item
Enable MAC Authentication
Offline Detection Period
Quiet Time
Server Timeout Time
Authentication ISP Domain
Authentication Information
Format
Description
Specifies whether to enable MAC authentication globally.
Sets the period that the device waits for traffic from a user before it
regards the user idle.
Sets the interval that the device must wait before it can perform MAC
authentication for a user that has failed MAC authentication.
Sets the interval that the device waits for a response from a RADIUS
server before it regards the RADIUS server unavailable.
Specifies the ISP domain for MAC authentication users.
If no ISP domain is specified, the system default authentication
domain is used for MAC authentication users.
Configures the properties of MAC authentication user accounts.
•
MAC without hyphen—Uses MAC-based accounts, and excludes
hyphens from the MAC address, for example, xxxxxxxxxxxx.
•
MAC with hyphen—Uses MAC-based accounts, and hyphenates
the MAC address, for example, xx-xx-xx-xx-xx-xx.
•
Fixed—Uses a shared account. You must specify a username and
password for the account.
407
Table 125, and then click Apply.