HP 1920 Gigabit Ethernet Switch Series User Manual page 58
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
Figure 33 Configuring stack ports on Switch B
Switch B becomes a member device.
4.
On Switch C, configure GigabitEthernet 1/0/1 (the port connected to Switch B) as a stack port:
a.
Select Stack from the navigation tree of Switch C.
b.
In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1.
c.
Click Enable.
Figure 34 Configuring a stack port on Switch C
Switch C becomes a member device.
5.
On Switch D, configure GigabitEthernet 1/0/1 (the port connected to Switch B) as a stack port:
a.
Select Stack from the navigation tree of Switch D.
b.
In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1.
c.
Click Enable.
Switch D becomes a member device.
45
Hide quick links:
Advertisement
Table of Contents
