HP 1920 Gigabit Ethernet Switch Series User Manual page 164

Figure 146 Creating a VLAN interface
3. Configure the VLAN interface as described in
4. Click Apply.
Table 43 Configuration items
Item
Input a VLAN ID:
DHCP
BOOTP
Manual
Configure
Primary
IPv4
Address
IPv4
Address
Mask
Length
Description
Enter the ID of the VLAN interface to be created. Before creating a VLAN interface,
make sure the corresponding VLAN exists.
Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to get an IP address automatically by
selecting the DHCP or BOOTP option. Otherwise, select the Manual
option to manually assign the VLAN interface an IP address.
After a VLAN interface fails to get an IP address through DHCP
multiple times, the device stops IP address application and configures
the default IP address for the interface.
Configure an IPv4 address for the VLAN interface.
This field is available after you select the Manual option.
Set the subnet mask length (or enter a mask in dotted decimal
notation format).
This field is available after you select the Manual option.
151
Table 43.
These items
are available
after you
select the
Configure
Primary IPv4
Address box.