HP 1920 Gigabit Ethernet Switch Series User Manual page 363
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
c.
Select the authentication method CHAP.
d.
Click Apply.
Figure 331 Configuring 802.1X globally
2.
Configure 802.1X for GigabitEthernet 1/0/1:
a.
In the Ports With 802.1X Enabled area, click Add.
b.
Select GigabitEthernet1/0/1 from the Port list.
c.
Click Apply.
Figure 332 Configuring 802.1X for GigabitEthernet 1/0/1
Verifying the configuration
After the user passes authentication and gets online, use the ping command to test whether ACL 3000
takes effect.
1.
From the navigation tree, select Network > Diagnostic Tools.
The ping page appears.
2.
Enter the destination IP address 10.0.0.1.
3.
Click Start.
350
Hide quick links:
Advertisement
Table of Contents
