Configuring Switch B; Configuration Guidelines - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 145 Assigning GigabitEthernet 1/0/1 to VLAN 2 and to VLANs 6 through 50 as a
tagged member

Configuring Switch B

Configure Switch B in the same way Switch A is configured. (Details not shown.)

Configuration guidelines

When you configure VLANs, follow these guidelines:
As the default VLAN, VLAN 1 can be neither created nor removed manually.
•
You cannot manually create or remove VLANs reserved for special purposes.
•
Dynamic VLANs cannot be removed on the page for removing VLANs.
•
You cannot remove a VLAN that has referenced a QoS policy.
•
149