Figure 377 Local certificate request page
4.
Configure the parameters, as described in
Table 123 Configuration items
Item
Domain Name
Password
Enable Offline Mode
5.
Click Apply.
If you select the online mode, the system shows a prompt that the certificate request has been
submitted. In this case, click OK to finish the operation. If you select the offline mode, the offline
certificate request information page appears In this case, you must submit the information by an
out-of-band way to the CA to request a local certificate.
Figure 378 Offline certificate request information page
Table
Description
Select the PKI domain for the certificate.
Enter the password for certificate revocation.
Select this box to request a certificate in offline mode, that is, by an out-of-band
means like FTP, disk, or email.
397
123.