Uploading A File; Removing A File; Specifying The Main Boot File - HP 1920 Gigabit Ethernet Switch Series User Manual

4. Click Download File.
The File Download dialog box appears.
5. Open the file or save the file to a path.

Uploading a file

IMPORTANT:
Uploading a file takes some time. HP recommends not performing any operation on the Web interface
during the upload.
1. Select Device > File Management from the navigation tree to enter the file management page
(see Figure
2. In the Upload File area, select the medium for saving the file from the Please select disk list.
3. Click Browse to navigate to the file to be uploaded.
4. Click Apply.

Removing a file

1. Select Device > File Management from the navigation tree to enter the file management page
(see Figure
2. Do one of the following:
Click the
Select a file from the file list and click Remove File.
To remove multiple files, repeat step 2, or select the files from the file list and click Remove File.

Specifying the main boot file

1. Select Device > File Manage from the navigation tree to enter the file management page
(see Figure
2. From the Please select disk list, select the medium that holds the application file to be used as the
main boot file.
3. Select the application file (.bin or .app file) from the file list.
4. Click Set as Main Boot File.
57).
57).
icon of a file to remove the file.
57).
68