Igmp Snooping Configuration Example; Network Requirements - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 233 Displaying detailed information about the entry
Table 85 Field description
Field
VLAN ID
Source Address
Group Address
Router Port(s)
Member Port(s)

IGMP snooping configuration example

Network requirements

As shown in
acts as the IGMP querier.
Perform the configuration so Host A can receive the multicast data addressed to the multicast group
224.1.1.1.
Description
ID of the VLAN to which the entry belongs.
Multicast source address. If no multicast sources are specified, this field displays
0.0.0.0.
Multicast group address.
All router ports.
All member ports.
Figure 234, IGMPv2 runs on Router A and IGMPv2 snooping runs on Switch A. Router A
260