Table 152 Configuration items
Item
VLAN
Customer VLAN
ACL IPv4
ACL
ACL IPv6
Adding a traffic behavior
1.
Select QoS > Behavior from the navigation tree.
2.
Click the Add tab to enter the page for adding a traffic behavior.
Figure 465 Adding a traffic behavior
3.
Add a traffic behavior as described in
4.
Click Add.
Table 153 Configuration items
Item
Behavior name
Description
Define a rule to match customer VLAN IDs.
If multiple such rules are configured for a class, the new configuration does not
overwrite the previous one.
You can configure only one VLAN ID at a time. Otherwise, the relevant QoS
policy fails to be applied. If the same VLAN ID is specified multiple times, the
system considers them as one. The relationship between different VLAN IDs is
logical OR.
Define an IPv4 ACL-based rule.
Define an IPv6 ACL-based rule.
Table
Description
Specify a name for the behavior to be added.
480
153.