Creating Vlans - HP 1920 Gigabit Ethernet Switch Series User Manual

Step
3. Setting the PVID for a
4. Configure the hybrid port as an untagged
member of the specified VLANs:
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying a VLAN
Configure the hybrid port as an untagged
member of the specified VLAN.
5. Modifying
6. Configure the hybrid port as a tagged member of
the specified VLAN:
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying a VLAN
Configure the hybrid port as a tagged
member of the specified VLAN.
7. Modifying

Creating VLANs

1. From the navigation tree, select Network > VLAN.
2. Click Create to enter the page for creating VLANs.
3. Enter the VLAN IDs, a VLAN ID range, or both.
4. Click Create.
port.
ports.
ports.
Remarks
Optional.
Configure the PVID of the hybrid port.
By default, the PVID of a hybrid port is VLAN 1.
N/A
Configure the
untagged VLAN of the
hybrid port.
N/A
Configure the tagged
VLAN of the hybrid
port.
139
Required.
A hybrid port can have
multiple untagged VLANs.
Repeat these steps to
configure multiple
untagged VLANs for a
hybrid port.
By default, the untagged
VLAN of a hybrid port is
VLAN 1.
Required.
A hybrid port can have
multiple tagged VLANs.
You can repeat these steps
to configure multiple
tagged VLANs for the
hybrid port.