Configuration Procedures; Configuring A Static Aggregation Group; Configuring A Dynamic Aggregation Group; Creating A Link Aggregation Group - HP 1920 Gigabit Ethernet Switch Series User Manual

Configuration procedures

Configuring a static aggregation group

Step
1. Creating a link aggregation
2. (Optional.)
interface

Configuring a dynamic aggregation group

Step
1. Creating a link
aggregation
2. (Optional.)
aggregate interface
information.
3. (Optional.)
LACP priority.
4. (Optional.)
LACP-enabled port
information.

Creating a link aggregation group

1. From the navigation tree, select Network > Link Aggregation.
2. Click Create.
group.
Displaying aggregate
information.
Remarks
Create a dynamic aggregate interface and configure member ports for the
dynamic aggregation group automatically created. LACP is enabled
automatically on all the member ports.
group.
By default, no link aggregation group exists.
Displaying
Display detailed information of an existing aggregation group.
Set LACP priority for the local system and link aggregation member ports.
Setting
Changes of LACP priorities affect the aggregation state of the member ports.
The default port LACP priority and system LACP priority are both 32768.
Displaying
Display detailed information of LACP-enabled ports and the corresponding
remote (partner) ports.
Remarks
Create a static aggregate interface and configure member
ports for the static aggregation group.
By default, no link aggregation group exists.
Display detailed information of an existing aggregation
group.
208