Adding Rules To An Snmp View - HP 1920 Gigabit Ethernet Switch Series User Manual

8. Repeat steps 6 and 7 to add more rules for the SNMP view.
9. Click Apply.
To cancel the view, click Cancel.
Figure 104 Creating an SNMP view (2)
Table 34 Configuration items
Item
View Name
Rule
MIB Subtree OID
Subtree Mask

Adding rules to an SNMP view

1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The page in
3. Click the
The Add rule for the view ViewDefault window appears.
Description
Set the SNMP view name.
Select to exclude or include the objects in the view range determined by the MIB
subtree OID and subtree mask.
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB subtree OID identifies the position of a node in the MIB tree, and it can
uniquely identify a MIB subtree.
Set the subtree mask, a hexadecimal string. Its length must be an even number in
the range of 2 to 32.
If no subtree mask is specified, the default subtree mask (all Fs) will be used for
mask-OID matching.
Figure 102 appears.
icon of the target view.
116