Adding Oui Addresses To The Oui List - HP 1920 Gigabit Ethernet Switch Series User Manual

Item
Voice VLAN port state
Voice VLAN ID
Select Ports

Adding OUI addresses to the OUI list

1. Select Network > Voice VLAN from the navigation tree.
2. Click the OUI Add tab.
Figure 152 Adding OUI addresses to the OUI list
3. Add an OUI address to the list as described in
4. Click Apply.
Table 51 Configuration items
Item
OUI Address
Mask
Description
Description
Select Enable or Disable in the list to enable or disable the voice VLAN function
on the port.
Set the voice VLAN ID of a port when the voice VLAN port state is set to Enable.
Select the port on the chassis front panel.
You can select multiple ports to configure them in bulk. The numbers of the
selected ports will be displayed in the Ports selected for voice VLAN field.
NOTE:
To set the voice VLAN assignment mode of a port to automatic, you must make
sure that the link type of the port is trunk or hybrid, and that the port does not
belong to the voice VLAN.
Description
Set the source MAC address of voice traffic.
Set the mask length of the source MAC address.
Set the description of the OUI address entry.
162
Table 51.