Traceroute Operation - HP 1920 Gigabit Ethernet Switch Series User Manual
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
Figure 295 Ping operation result
Traceroute operation
The Web interface does not support IPv6 traceroute.
Before performing a traceroute operation, perform the following tasks:
Enable sending of ICMP timeout packets by executing the ip ttl-expires enable command on
•
intermediate devices.
•
Enable sending of ICMP destination unreachable packets by executing the ip unreachables enable
command on the destination device.
To perform a traceroute operation:
1.
From the navigation tree, select Network > Diagnostic Tools.
2.
Click the Trace Route tab.
The traceroute configuration page appears.
Figure 296 Traceroute configuration page
319
Hide quick links:
Advertisement
Table of Contents
