Power Supply From Bs - Ikegami HC-HD300 Operation Manual

3.3 Power Connection

Power Supply from BS

Explains how to supply power from the BSF-300.
BSF-300 rear view
AC INPUT connector
AC cable
Power outlet
1
Make sure the BSF-300 MAIN POWER switch is OFF.
2
Connect the AC cable to the AC INPUT connector on the rear of BSF-300.
3
Insert the AC plug into the power outlet.
4
Connect the BSF-300 and the camera via a fiber cable.
This completes the procedure for connecting power from the BSF-300 to the camera.
There are two methods of switching power to the camera On/Off in this configuration:
- Operating the camera power from the BS.
- Operating the camera power from the OCP (remote control).
50
Fiber cable
To the camera
HC-HD300 1412 VER1 (U)