Power Connection; Power Supply From Ac Adapter - Ikegami HC-HD300 Operation Manual

3.3 Power Connection

There are two ways to supply power to the camera. Select the power supply according to the system configuration and operating
system.
● To supply from an AC Adapter (External power)
Directly connect the camera and the AC Adapter via a DC POWER cable. Use the AC Adapter specified as DC11V to 16V (4A or
more).
● To supply from the BS
Connect the camera and the BS via the fiber cable. The fiber cable contains a power conductor.
Note:
Make sure that the camera POWER switch is OFF before connecting the power. Refer to "Make Sure the Power Switch is OFF" (P33)
for how to check the power.

Power Supply from AC Adapter

This section explains how to supply the power from an AC Adapter (external power). For the details on the AC Adapter, refer to the
instruction manual accompanying the AC Adapter to be used. This section describes the AC Adapter which has the form as shown
below.
POWER indicator
POWER switch
DC OUT connector
1
Make sure the POWER switch on the AC Adapter is OFF.
2
Insert the AC plug of the AC Adapter into the power outlet.
3
Connect the DC OUT connector on the AC Adapter and the DC IN connector on the camera via the DC POWER
cable.
4
Turn the POWER switch on the AC Adapter ON.
The POWER indicator on the AC Adapter will light.
AC Adapter
AC plug
Power outlet
DC POWER cable
HC-HD300 1412 VER1 (U)
3.3 Power Connection
DC IN connector
Camera rear view
49
3