Attaching The Eyepiece - Ikegami HC-HD300 Operation Manual

3.2 Camera and Peripheral Installation and Connection
5
Adjust the viewfinder position.
● A djust the left and right positions of the
viewfinder
Turn the left-right lock lever on the camera
counterclockwise to unlock the viewfinder. Move the
viewfinder left and right to the desired position and
lock.
● A djust the front and back positions of the
viewfinder
Loosen the front-back lock lever on the camera to
unlock the viewfinder. Move the viewfinder back and
forth to the desired position and lock.
● Adjust the eyepiece angle
Move the eyepiece to a proper position so that the image
on the viewfinder is visible. The eyepiece can be rotated
160 degrees upward and 90 degrees downward. Adjust
the eyepiece angle in accordance with the camera angle.
■ Removing the Eyepiece
This section explains how to remove the eyepiece from the viewfinder.
1
Pull the eyepiece release lever and rotate the
eyepiece in the direction shown in the figure.
The eyepiece will be unlocked.
2
Pull out the eyepiece.

■ Attaching the Eyepiece

This section explains how to attach the eyepiece to the viewfinder.
1
Align △ mark on the viewfinder with △ mark on
the eyepiece and insert the eyepiece into the
viewfinder.
2
Rotate the eyepiece in the direction shown in the
figure.
Rotate the eyepiece until it clicks. You will hear a click
sound when the eyepiece is locked to the viewfinder.
46
Adjusting the eyepiece angle
0 to 250
(Up:160 , Down:90 )
Pull
Eyepiece release lever
HC-HD300 1412 VER1 (U)
Front
Eyepiece
mark