Ikegami HC-HD300 Operation Manual page 118

5.3 Using the Memory Card
M1
If a file with the same file name exists on the
memory card, a message is displayed asking
whether it is all right to write over the data. To
enable writing over of data, change [NO] to [YES]
and press the SET button. If [NO] has been
selected, storage is cancelled and the system
returns to step [3].
Note:
The images of the storage range for files are shown in the figure below.
ALL FILE
SNAPSHOT FILE
Parameters for adjusting
functions and ON/OFF state.
SCENE FILE
REFERENCE FILE
(ABB/AWB)
LENS FILE
MENU FILE
102 HC-HD300 1412 VER1 (U)