Temp!!" Or "Fan!!" Appears On The Vf Screen - Ikegami HC-HD300 Operation Manual

6.2 "TEMP!!" or "FAN!!" Appears on the VF Screen

6.2 "TEMP!!" or "FAN!!" Appears on the VF Screen
When the temperature inside the camera increases abnormally, a warning indicating an abnormal temperature rise flashes on the
viewfinder screen.
Status
The camera is exposed to direct sunlight for
many hours.
TEMP!! flashing
The camera is used near some heating appliance.
If a fan stops due to some failure, a warning indicating an irregular fan stop flashes on the viewfinder screen.
Status
FAN!! flashing Fan stops.
Note:
To prevent temperature increase inside the camera, cooling fans are provided at the top of the camera and fiber adaptor.
For how to check which fan stops, refer to "5. CAMERA SETTINGS and ADJUSTMENT [Menu Configuration and content]" (P81).
108
Cause
Cause
HC-HD300 1412 VER1 (U)
Action
Put a sunshade cover on the camera to avoid
direct sunlight.
Move the position of the camera or heating appliance.
Action
Inspect the fan for any problem.