Ikegami HC-HD300 Operation Manual page 58

3.2 Camera and Peripheral Installation and Connection
5
After inserting the front wedge of the camera,
tighten the lock lever until the camera is completely
fixed.
Turn the lock lever until it clicks. You will hear a click
sound when the lock lever is locked.
6
Make sure that the camera is fixed to the tripod
mount plate completely and does not wobble.
CAUTION:
Be sure to mount the camera on a tripod securely, or the camera might fall and get damaged and you can be injured.
7
Loosen the tilt lock and pan lock and adjust the
pan and tilt of the camera.
Setting the pan brake and tilt brake to a low number
will minimize friction and ensure smooth movement.
8
After positioning the camera to the desired pan
and tilt, tighten the tilt lock and pan lock to lock the
camera.
■ Removing the Camera from the Tripod
This section explains how to remove the camera from the tripod.
1
Press the red button on the lock lever to unlock the camera.
Be sure to hold the handle while pressing the button to prevent the camera from falling.
2
Lift the camera and remove the wedges from the tripod mount plate.
42
Red button
Lock lever
Tighten the lock lever until
the camera is completely fixed.
Camera right view
Pan lock
Loosen the tilt lock and pan lock and
adjust the pan and tilt of the camera.
Tilt brake
Loosen
Tighten the tilt lock and pan lock to
lock the camera.
HC-HD300 1412 VER1 (U)
Tilt lock
Tripod
Pan brake
0 1 2 3 4 5 6 7
Tighten