Ikegami HC-HD300 Operation Manual page 107

Menu Item
MATRIX USER2 DATA SET
― DATA SET MODE
― R-G
― R-B
― G-R
― G-B
― B-R
― B-G
DATA CLEAR
INCOM SETUP (ENG)
― HEADSET
― INCOM1
― INCOM1 POWER
― INCOM1 GAIN
― INCOM2
― INCOM2 POWER
INCOM2 GAIN
― RECEIVE
― INCOM1 L/R CH
― INCOM1
― INCOM2
― PGM1
― PGM2
― INCOM2 L/R CH
― INCOM1
― INCOM2
― PGM1
PGM2
― EARPHONE
― INCOM1
― INCOM2
PGM SELECT
Initial
Setting Value
Setting
OFF ON, OFF
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
--- READY
CARBON CARBON, DYNAMIC
ON ON, OFF
NORMAL NORMAL, HI
CARBON CARBON, DYNAMIC
ON ON, OFF
NORMAL NORMAL, HI
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
ON ON, OFF
OFF ON, OFF
OFF INC1, INC2, OFF
HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
Sets the preset (USER2) of color matrix.
ON : Sets the preset data.
OFF : Does not set the preset data.
Sets the matrix of R-G.
Sets the matrix of R-B.
Sets the matrix of G-R.
Sets the matrix of RG-B.
Sets the matrix of B-R.
Sets the matrix of B-G.
READY : Normal status
PUSH SET → CLR : Clears the preset data.
CANCEL : Exit "DATA CLEAR" without clearing
the settings.
Selects carbon or dynamic for INCOM microphone.
Sets the ON/OFF of the power supply to dynamic
microphone. (Fixed to ON when ICOM1 is set to CARBON.)
Sets the GAIN of the dynamic microphone when
"CARBON" is selected in ICOM1.
Selects carbon or dynamic for INCOM microphone.
Sets the ON/OFF of the power supply to dynamic
microphone. (Fixed to ON when ICOM2 is set to CARBON.)
Sets the GAIN of the dynamic microphone when
"CARBON" is selected in ICOM2.
Sets the assignment of INCOM1 channel to headsets.
Sets the assignment of INCOM2 channel to headsets.
Sets the assignment of PGM1 channel to headsets.
Sets the assignment of PGM2 channel to headsets.
Sets the assignment of INCOM1 channel to headsets.
Sets the assignment of INCOM2 channel to headsets.
Sets the assignment of PGM1 channel to headsets.
Sets the assignment of PGM2 channel to headsets.
If it is set to ON, INCOM1 signal is outputted from
EARPHONE connector on the back side of camera.
If it is set to ON, INCOM2 signal is outputted from
EARPHONE connector on the back side of camera.
INC1 : PGM1 signal and PGM2 signal are outputted from
EARPHONE connector on the back of camera, and
the volume can be adjusted by the INCOM1 PGM
volume on the back of camera.
INC2 : PGM1 signal and PGM2 signal are outputted from
EARPHONE connector on the back of camera, and
the volume can be adjusted by the INCOM2 PGM
volume on the back of camera.
MENU DATA
ALL VF
- -
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
- -
× ×
○ ×
× ×
5
× ×
○ ×
× ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
91