Ikegami HC-HD300 Operation Manual page 67

■ To Control Power ON/OFF from BS
You can control the power ON/OFF of the camera from the BS.
5
Set the BS MAIN POWER switch on the front of the BS to "ON".
This turns on the power of the BS and lights the BS MAIN POWER indicator. In addition, the status of the camera cable
connection between the camera and the BS is automatically checked. When the connection status is determined as normal,
power is supplied to the camera, and the HEAD POWER indicator also lights.
BSF-300 front view
BS MAIN POWER indicator
HEAD POWER indicator
BS MAIN POWER switch
HC-HD300 1412 VER1 (U)
3.3 Power Connection
51
3