Ikegami HC-HD300 Operation Manual page 34

2.1 Camera and Viewfinder
① Shoulder belt hook
Attaches the optional shoulder belt.
② VF connector
Connects the VF cable
③ VF CONNECTOR LOCK button
Prevents the VF connector from being disconnected. To disconnect the VF cable, hold
down this button.
④ VF CABLE clamp
Secures the VF cable.
⑤ RET-2/MIC button
The RET-2 switch function or INCOM MIC switch function is allocated to this button. The
button selects the function or turns ON/OFF the function.
● When set to RET-2
The viewfinder image is switched from the camera image to RET-2 image while this
button is pressed.
● When set to INCOM MIC
Turns the intercom microphone ON/OFF when the INCOM FRONT VR SELECT switch
on the rear of the camera is set to "ENG" or "PROD". The intercom microphone is turned
ON while this button is pressed.
⑥ RET-1 button
Switches the viewfinder image from the camera image to RET-1 image. The viewfinder
image is switched to the RET-1 image while this button is pressed.
⑦ Breaker
A breaker (8A) for the camera
⑧ MIC CABLE clamp
Secures the microphone cable.
⑨ CAMERA connector
Connects the camera and BS with a fiber cable. It is compatible with NEUTRIK Optical
CON DUO connector.
⑩ CAMERA CABLE clamp
Secures the fiber cable (9.2mm diameter).
⑪ MEMORY CARD slot
A slot for the memory card (SD card) used to store and recall setup data. When using the
memory card, carefully insert the card in the slot until you hear a clicking sound.
When removing the card, carefully push in the upper part of the inserted card until you hear
a clicking sound. The card will move up, making it possible to remove it.
When not using the memory card, attach the cover to prevent dust from accumulating.
When storing or retrieving data, the access indicator on the side of the the slot is lit. Do not
remove the card if the access indicator is lit.
This could not only destroy the data on the card but also destroy camera data.
18 HC-HD300 1412 VER1 (U)
Reference:
The functions are allocated
using the menu. Refer to
"5. CAMERA SETTINGS
and ADJUSTMENT [Menu
Configuration and content]"
(P81) for setting.
Reference:
Refer to "SAFETY
PRECAUTIONS [Regarding
the Fiber Connector and the
Fiber Optic Cable]" (vii) for
how to handle and secure the
fiber cable.