Ikegami HC-HD300 Operation Manual page 112

5.2 Settings from the Menu
M1
Turn the rotary pulse switch to position the cursor
on the AUTO SEL NAME display part (AB40X10
ABCD), and press the SET button.
The screen switches to a display for obtaining a new
model number from the lens, and the letters "CANCEL"
flash.
Note:
"(AB40X10 ABCD)" is used here for an example of
the model name automatically and previously obtained
from the lens.
M2
Turn the rotary pulse switch to switch the cursor on
"CANCEL" to "AUTO READ," and press the SET
button.
- "COMPLETED" appears on the bottom.
- When "COMPLETED" disappears, a newly loaded
model name will appear.
Note:
"(BB40X10 BCDE)" is used here for an example of the
model name automatically and newly obtained from
the lens.
M3
Turn the rotary pulse switch to position the cursor
on "FILE SET," and press the SET button.
The cursor moves to the mode selection column.
M4
Turn the rotary pulse switch to switch the cursor on
"MANUAL" to "OFF," and press the SET button to
complete the lens file creation. Then, go to Step 8.
96 HC-HD300 1412 VER1 (U)
Position the cursor on
"AB40X10 ABCD" and
confirm.
The letters "CANCEL"
flash.
Switch the cursor to
"AUTO READ" and
confirm.
"COMPLETED"
appears.
The model name newly
loaded from the lens
appears.
Position the cursor on
"FILE SET" and confirm.
Switch the cursor on
"MANUAL" to "OFF"
and confirm.