Test Pulse (Cal Signal) Check; External Chart Check - Ikegami HC-HD300 Operation Manual

4.5 Output Signal Check

Test Pulse (CAL Signal) Check

Check if the level of the video system is normal.
1
Set the CAL button on the OCP or MCP to ON.
Ensure that 100% level of test pulse is output.
Note:
If an OCP-10 is used, make sure you assign the CAL function to an F switch for this check.
OCP

External Chart Check

Shoot an external chart and ensure that the image is normal.
64
MCP
HC-HD300 1412 VER1 (U)
CAL button "ON"
100%
80%
60%
40%
20%
MONITOR SELECT
0%
button
-20%
"R", "G", "B", "Y",
"SEQ"
(SEQ: R, G, B)
PM
WFM