Dc In Connector; Aux Out Connector; Mic-2 Connector; Mic-1 Connector - Ikegami HC-HD300 Operation Manual

⑮ DC IN connector

Connects the AC adapter to supply +12V DC power to the camera.
⑯ AUX OUT connector
Outputs the Q-TV and VBS signals.
Select the Q-TV and VBS signals from the camera menu screen. The Q-TV signal output
function only responds during BS operation.

⑰ MIC-2 connector

Connects microphone and input audio signals of line level.

⑱ MIC-1 connector

Connects microphone and input audio signals of line level.

⑲ MIC-2 POWER switch

Selects the type of power supplied to the microphone connected to the MIC-2 connection.
The settings depend on the type of microphone used.
+12V : Supplies +12V AB power
OFF : Supplies no power. Applicable for a dynamic microphone or a microphone with
built-in battery which requires no power supply
+48V : Supplies +48V Phantom power

MIC-1 POWER switch

Selects the type of power supplied to the microphone connected to the MIC-1 connection.
The settings depend on the type of microphone used. Its settings are identical to the MIC-2
POWER switch.
DC OUT connector
DC 12V (0.5A) standard output connector for miscellaneous use (for example, a wireless
mic receiver).

Q-TV/GL, MON OUT connector

Outputs the signal selected by the Q-TV/GL, MON OUT SELECT switch.
● When set to Q-TV/GL
Select the Q-TV and VBS signals from the camera menu screen. Outputs the analog
video signal which is input to the Q-TV connector on the rear of the BS. The Q-TV, VBS
video signal output function is available only when the camera is connected to the BS.
Inputs a PS/S signal (tri-level sync) as external synchronization signal input (GENLOCK
input). The external synchronization signal input is only available for the self-contained
camera.
● When set to MON OUT
Outputs the monitor signal. Select the MON, SYNC signals from the camera menu
screen.

Q-TV/GL, MON OUT SELECT switch

Selects the type of signal which is output from the Q-TV/GL, MON OUT connector.

INCOM-1 connector

Connects the INCOM-1 intercom headset. It is compatible with XLR series or 110-type
phone jack connectors.

INCOM TALK SELECT switch

Selects a TALK line of INCOM.
PROD : Talks on Production intercom channel.
BOTH : Talks on both Production and Engineering channels.
ENG : Talks on Engineering intercom channel.

INCOM-1 PGM2 control knob

Controls the PGM2 volume of the INCOM-1 program intercom.

INCOM-1 PGM1 control knob

Controls the PGM1 volume of the INCOM-1 program intercom.

INCOM-1 control knob

Controls the INCOM-1 intercom volume.
HC-HD300 1412 VER1 (U)
2.1 Camera and Viewfinder
2
23