Ikegami HC-HD300 Operation Manual page 105

■ MENU (4/4)
Menu Item
INCOM SETUP
― RECEIVE
― INCOM1 L/R CH
― INCOM1
― INCOM2
― PGM1
― PGM2
― INCOM2 L/R CH
― INCOM1
― INCOM2
― PGM1
PGM2
PGM FRONT VR
MENU MODE
ENGINEER MENU
Initial
Setting Value
Setting
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
BOTH BOTH, LEFT, RIGHT
PGM1 PGM1, PGM2
OFF OFF, ON
HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
Do the Assignment Settings to the head set of INCOM1
channel.
Do the Assignment Settings to the head set of INCOM2
channel.
Do the Assignment Settings to the head set of PGM1
channel.
Do the Assignment Settings to the head set of PGM2
channel.
Do the Assignment Settings to the head set of INCOM1
channel.
Do the Assignment Settings to the head set of INCOM2
channel.
Do the Assignment Settings to the head set of PGM1
channel.
Do the Assignment Settings to the head set of PGM2
channel.
Choose a signal to control by the PGM volume of the camera
right side surface.
Set to ON to display the ENGINEER menu.
* If the camera power is turned OFF, this menu setting
returns to OFF.
MENU DATA
ALL VF
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
○ ×
5
× ×
× ×
89